Xiaomi ZNCZ02LM
Model | ZNCZ02LM |
Vendor | Xiaomi |
Description | Mi power plug ZigBee |
Exposes | switch (state), power, energy, device_temperature, power_outage_memory, linkquality |
Picture | ![]() |
Notes
Pairing
Press and hold the button on the device for +- 10 seconds (until the blue light starts blinking and stops blinking), release and wait.
You may have to unpair the switch from an existing coordinator before the pairing process will start. If you can't do this, try to remove battery (if it has one), push the button (to completely discharge device), place the battery back and try pairing again.
Power outage memory
This option allows the device to restore the last on/off state when it's reconnected to power. To set this option publish to zigbee2mqtt/FRIENDLY_NAME/set
payload {"power_outage_memory": true}
(or false
). Now toggle the plug/switch once with the button on it, from now on it will restore its state when reconnecting to power.
Voltage
Some versions of the plug provide voltage. This depends on the firmware on the device. Confirmed working are the ones with dateCode
02-28-2017
(can be checked in data/database.db
). Note that Xiaomi doesn't provide firmware files, so the software cannot be downgraded/upgraded.
OTA updates
This device supports OTA updates.
Options
state_action
: State actions will also be published as 'action' when true (default false). The value must betrue
orfalse
power_calibration
: Calibrates the power value (percentual offset), takes into effect on next report of device. The value must be a number.power_precision
: Number of digits after decimal point for power, takes into effect on next report of device. The value must be a number with a minimum value of0
and with a with a maximum value of3
energy_calibration
: Calibrates the energy value (percentual offset), takes into effect on next report of device. The value must be a number.energy_precision
: Number of digits after decimal point for energy, takes into effect on next report of device. The value must be a number with a minimum value of0
and with a with a maximum value of3
device_temperature_calibration
: Calibrates the device_temperature value (absolute offset), takes into effect on next report of device. The value must be a number.
Exposes
Switch
The current state of this switch is in the published state under the state
property (value is ON
or OFF
). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state": "ON"}
, {"state": "OFF"}
or {"state": "TOGGLE"}
. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state": ""}
.
Power (numeric)
Instantaneous measured power. Value can be found in the published state on the power
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"power": ""}
. It's not possible to write (/set
) this value. The unit of this value is W
.
Energy (numeric)
Sum of consumed energy. Value can be found in the published state on the energy
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is kWh
.
Device_temperature (numeric)
Temperature of the device. Value can be found in the published state on the device_temperature
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is °C
.
Power_outage_memory (binary)
Enable/disable the power outage memory, this recovers the on/off mode after power failure. Value can be found in the published state on the power_outage_memory
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"power_outage_memory": ""}
. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"power_outage_memory": NEW_VALUE}
. If value equals true
power_outage_memory is ON, if false
OFF.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.