SONOFF ZBMINI
| Model | ZBMINI |
| Vendor | SONOFF |
| Description | Zigbee two way smart switch |
| Exposes | switch (state), linkquality |
| Picture |  |
Notes
Device stuck
In case of switching the coordinators a device may stuck in error state which is indicated by slowly blinking light (about 1 flash per second). To switch a device to a pairing mode power it off for 10 sec. After power on it enters pairing mode automatically.
Options
state_action: State actions will also be published as 'action' when true (default false). The value must betrueorfalse
Exposes
Switch
The current state of this switch is in the published state under the state property (value is ON or OFF). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set with payload {"state": "ON"}, {"state": "OFF"} or {"state": "TOGGLE"}. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"state": ""}.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.