TuYa TS0601_thermostat_3
Model | TS0601_thermostat_3 |
Vendor | TuYa |
Description | Thermostatic radiator valve |
Exposes | lock (state), battery_low, climate (current_heating_setpoint, local_temperature, system_mode, running_state, local_temperature_calibration), scale_protection, frost_protection, error, linkquality |
Picture | ![]() |
White-label | Avatto ME167 |
Notes
Pairing
You can pair this device by setting device to manual mode by short press rotary button (until clock symbol is not displayed), setting temperature to "OF" by rotating left, then press and hold rotary button. Network symbol will start to blink.
Exposes
Lock
The current state of this lock is in the published state under the child_lock
property (value is LOCK
or UNLOCK
). To control this lock publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"child_lock": "LOCK"}
or {"child_lock": "UNLOCK"}
. It's not possible to read (/get
) this value.
Battery_low (binary)
Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low
property. It's not possible to read (/get
) or write (/set
) this value. If value equals true
battery_low is ON, if false
OFF.
Climate
This climate device supports the following features: current_heating_setpoint
, local_temperature
, system_mode
, running_state
, local_temperature_calibration
.
current_heating_setpoint
: Temperature setpoint. To control publish a message to topiczigbee2mqtt/FRIENDLY_NAME/set
with payload{"current_heating_setpoint": VALUE}
whereVALUE
is the °C between5
and35
. Reading (/get
) this attribute is not possible.local_temperature
: Current temperature measured on the device (in °C). Reading (/get
) this attribute is not possible.system_mode
: Mode of this device. To control publish a message to topiczigbee2mqtt/FRIENDLY_NAME/set
with payload{"system_mode": VALUE}
whereVALUE
is one of:auto
,heat
,off
. Reading (/get
) this attribute is not possible.running_state
: The current running state. Possible values are:idle
,heat
. Reading (/get
) this attribute is not possible.local_temperature_calibration
: Offset to be used in the local_temperature. To control publish a message to topiczigbee2mqtt/FRIENDLY_NAME/set
with payload{"local_temperature_calibration": VALUE}.
The minimal value is-3
and the maximum value is3
with a step size of1
.
Scale_protection (binary)
If the heat sink is not fully opened within two weeks or is not used for a long time, the valve will be blocked due to silting up and the heat sink will not be able to be used. To ensure normal use of the heat sink, the controller will automatically open the valve fully every two weeks. It will run for 30 seconds per time with the screen displaying "Ad", then return to its normal working state again.. Value can be found in the published state on the scale_protection
property. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"scale_protection": NEW_VALUE}
. If value equals ON
scale_protection is ON, if OFF
OFF.
Frost_protection (binary)
When the room temperature is lower than 5 °C, the valve opens; when the temperature rises to 8 °C, the valve closes.. Value can be found in the published state on the frost_protection
property. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"frost_protection": NEW_VALUE}
. If value equals ON
frost_protection is ON, if OFF
OFF.
Error (numeric)
If NTC is damaged, "Er" will be on the TRV display.. Value can be found in the published state on the error
property. It's not possible to read (/get
) or write (/set
) this value.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.