# TuYa TS0601_3_phase_clamp_meter

Model | TS0601_3_phase_clamp_meter |

Vendor | TuYa |

Description | 3-phase clamp power meter |

Exposes | ac_frequency, temperature, current, power, energy, energy_a, energy_b, energy_c, voltage_a, voltage_b, voltage_c, power_a, power_b, power_c, current_a, current_b, current_c, power_factor_a, power_factor_b, power_factor_c, linkquality |

Picture | |

White-label | MatSeePlus PC321-Z-TY |

## Options

`temperature_precision`

: Number of digits after decimal point for temperature, takes into effect on next report of device. The value must be a number with a minimum value of`0`

and with a with a maximum value of`3`

`temperature_calibration`

: Calibrates the temperature value (absolute offset), takes into effect on next report of device. The value must be a number.`energy_precision`

: Number of digits after decimal point for energy, takes into effect on next report of device. The value must be a number with a minimum value of`0`

and with a with a maximum value of`3`

`energy_calibration`

: Calibrates the energy value (percentual offset), takes into effect on next report of device. The value must be a number.`current_precision`

: Number of digits after decimal point for current, takes into effect on next report of device. The value must be a number with a minimum value of`0`

and with a with a maximum value of`3`

`current_calibration`

: Calibrates the current value (percentual offset), takes into effect on next report of device. The value must be a number.`power_precision`

: Number of digits after decimal point for power, takes into effect on next report of device. The value must be a number with a minimum value of`0`

and with a with a maximum value of`3`

`power_calibration`

: Calibrates the power value (percentual offset), takes into effect on next report of device. The value must be a number.

## Exposes

### Ac_frequency (numeric)

Measured electrical AC frequency. Value can be found in the published state on the `ac_frequency`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `Hz`

.

### Temperature (numeric)

Measured temperature value. Value can be found in the published state on the `temperature`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `°C`

.

### Current (numeric)

Instantaneous measured electrical current. Value can be found in the published state on the `current`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `A`

.

### Power (numeric)

Instantaneous measured power. Value can be found in the published state on the `power`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `W`

.

### Energy (numeric)

Sum of consumed energy. Value can be found in the published state on the `energy`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `kWh`

.

### Energy_a (numeric)

Sum of consumed energy (phase A). Value can be found in the published state on the `energy_a`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `kWh`

.

### Energy_b (numeric)

Sum of consumed energy (phase B). Value can be found in the published state on the `energy_b`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `kWh`

.

### Energy_c (numeric)

Sum of consumed energy (phase C). Value can be found in the published state on the `energy_c`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `kWh`

.

### Voltage_a (numeric)

Measured electrical potential value (phase A). Value can be found in the published state on the `voltage_a`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `V`

.

### Voltage_b (numeric)

Measured electrical potential value (phase B). Value can be found in the published state on the `voltage_b`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `V`

.

### Voltage_c (numeric)

Measured electrical potential value (phase C). Value can be found in the published state on the `voltage_c`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `V`

.

### Power_a (numeric)

Instantaneous measured power (phase A). Value can be found in the published state on the `power_a`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `W`

.

### Power_b (numeric)

Instantaneous measured power (phase B). Value can be found in the published state on the `power_b`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `W`

.

### Power_c (numeric)

Instantaneous measured power (phase C). Value can be found in the published state on the `power_c`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `W`

.

### Current_a (numeric)

Instantaneous measured electrical current (phase A). Value can be found in the published state on the `current_a`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `A`

.

### Current_b (numeric)

Instantaneous measured electrical current (phase B). Value can be found in the published state on the `current_b`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `A`

.

### Current_c (numeric)

Instantaneous measured electrical current (phase C). Value can be found in the published state on the `current_c`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `A`

.

### Power_factor_a (numeric)

Instantaneous measured power factor (phase A). Value can be found in the published state on the `power_factor_a`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `%`

.

### Power_factor_b (numeric)

Instantaneous measured power factor (phase B). Value can be found in the published state on the `power_factor_b`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `%`

.

### Power_factor_c (numeric)

Instantaneous measured power factor (phase C). Value can be found in the published state on the `power_factor_c`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The unit of this value is `%`

.

### Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the `linkquality`

property. It's not possible to read (`/get`

) or write (`/set`

) this value. The minimal value is `0`

and the maximum value is `255`

. The unit of this value is `lqi`

.