Mercator SPP02G
Model | SPP02G |
Vendor | Mercator |
Description | IkuĆ¼ double indoors power point |
Exposes | switch (state), power, current, voltage, energy, linkquality |
Picture | ![]() |
Options
state_action
: State actions will also be published as 'action' when true (default false). The value must betrue
orfalse
power_calibration
: Calibrates the power value (percentual offset), takes into effect on next report of device. The value must be a number.power_precision
: Number of digits after decimal point for power, takes into effect on next report of device. The value must be a number with a minimum value of0
and with a with a maximum value of3
current_calibration
: Calibrates the current value (percentual offset), takes into effect on next report of device. The value must be a number.current_precision
: Number of digits after decimal point for current, takes into effect on next report of device. The value must be a number with a minimum value of0
and with a with a maximum value of3
voltage_calibration
: Calibrates the voltage value (percentual offset), takes into effect on next report of device. The value must be a number.voltage_precision
: Number of digits after decimal point for voltage, takes into effect on next report of device. The value must be a number with a minimum value of0
and with a with a maximum value of3
energy_precision
: Number of digits after decimal point for energy, takes into effect on next report of device. The value must be a number with a minimum value of0
and with a with a maximum value of3
energy_calibration
: Calibrates the energy value (percentual offset), takes into effect on next report of device. The value must be a number.
Exposes
Switch (left endpoint)
The current state of this switch is in the published state under the state_left
property (value is ON
or OFF
). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_left": "ON"}
, {"state_left": "OFF"}
or {"state_left": "TOGGLE"}
. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_left": ""}
.
Switch (right endpoint)
The current state of this switch is in the published state under the state_right
property (value is ON
or OFF
). To control this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"state_right": "ON"}
, {"state_right": "OFF"}
or {"state_right": "TOGGLE"}
. To read the current state of this switch publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"state_right": ""}
.
Power (numeric, left endpoint)
Instantaneous measured power. Value can be found in the published state on the power_left
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is W
.
Current (numeric, left endpoint)
Instantaneous measured electrical current. Value can be found in the published state on the current_left
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is A
.
Voltage (numeric, left endpoint)
Measured electrical potential value. Value can be found in the published state on the voltage_left
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is V
.
Energy (numeric)
Sum of consumed energy. Value can be found in the published state on the energy
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is kWh
.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.