Dawon DNS KB-HD100-ZB
Model | KB-HD100-ZB |
Vendor | Dawon DNS |
Description | IOT Card holder |
Exposes | card, battery_low, linkquality |
Picture |
Notes
Pairing
Press and hold the reset button on the device for +- 5 seconds (until the blue light starts blinking). After this the device will automatically join.
Exposes
Card (binary)
Indicates if the card is inserted (= true) or not (= false). Value can be found in the published state on the card
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"card": ""}
. It's not possible to write (/set
) this value. If value equals true
card is ON, if false
OFF.
Battery_low (binary)
Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low
property. It's not possible to read (/get
) or write (/set
) this value. If value equals true
battery_low is ON, if false
OFF.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.