HEIMAN HS2AQ-EM

Model	HS2AQ-EM
Vendor	HEIMAN
Description	Air quality monitor
Exposes	battery, temperature, humidity, pm25, hcho, voc, aqi, pm10, battery_state, linkquality
Picture

Options

• temperature_precision: Number of digits after decimal point for temperature, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

• temperature_calibration: Calibrates the temperature value (absolute offset), takes into effect on next report of device. The value must be a number.

• humidity_precision: Number of digits after decimal point for humidity, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

• humidity_calibration: Calibrates the humidity value (absolute offset), takes into effect on next report of device. The value must be a number.

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Temperature (numeric)

Measured temperature value. Value can be found in the published state on the temperature property. It's not possible to read (/get) or write (/set) this value. The unit of this value is °C.

Humidity (numeric)

Measured relative humidity. Value can be found in the published state on the humidity property. It's not possible to read (/get) or write (/set) this value. The unit of this value is %.

Pm25 (numeric)

Measured PM2.5 (particulate matter) concentration. Value can be found in the published state on the pm25 property. It's not possible to read (/get) or write (/set) this value. The unit of this value is µg/m³.

Hcho (numeric)

Measured Hcho value. Value can be found in the published state on the hcho property. It's not possible to read (/get) or write (/set) this value. The unit of this value is mg/m³.

Voc (numeric)

Measured VOC value. Value can be found in the published state on the voc property. It's not possible to read (/get) or write (/set) this value. The unit of this value is µg/m³.

Aqi (numeric)

Air quality index. Value can be found in the published state on the aqi property. It's not possible to read (/get) or write (/set) this value.

Pm10 (numeric)

Measured PM10 (particulate matter) concentration. Value can be found in the published state on the pm10 property. It's not possible to read (/get) or write (/set) this value. The unit of this value is µg/m³.

Battery_state (enum)

Value can be found in the published state on the battery_state property. It's not possible to read (/get) or write (/set) this value. The possible values are: not_charging, charging, charged.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.