IKEA E2001/E2002
| Model | E2001/E2002 |
| Vendor | IKEA |
| Description | STYRBAR remote control |
| Exposes | battery, action, linkquality |
| Picture |  |
Notes
Pairing
Pair the switch to Zigbee2MQTT by pressing the pair button (found under the back cover next to the battery) 4 times in a row within 5 seconds. If this doesn't work, try pressing the pair button up to 10 times in very quick succession. The red light on the side should flash a few times and then turn off. After a few seconds it turns back on and pulsate. When connected, the light turns off.
Button -> action mapping
| Icon | Action | Exposed Action |
|---|---|---|
| Light large ( top ) | push | on |
| Light large ( top ) | hold | brightness_move_up |
| Light large ( top ) | release | brightness_stop |
| ----- | ----- | ----- |
| Light small ( bottom ) | push | off |
| Light small ( bottom ) | hold | brightness_move_down |
| Light small ( bottom ) | release | brightness_stop |
| ----- | ----- | ----- |
| Arrow left | push | arrow_left_click |
| Arrow left | hold | arrow_left_hold |
| Arrow left | release | arrow_left_release |
| ----- | ----- | ----- |
| Arrow right | push | arrow_right_click |
| Arrow right | hold | arrow_right_hold |
| Arrow right | release | arrow_right_release |
For the arrow buttons it seems that the hold/move action takes a bit longer to be send.
OTA updates
This device supports OTA updates.
Options
simulated_brightness: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example:
simulated_brightness:
delta: 20 # delta per interval, default = 20
interval: 200 # interval in milliseconds, default = 200
legacy: Set to false to disable the legacy integration (highly recommended), will change structure of the published payload (default true). The value must betrueorfalse
Exposes
Battery (numeric)
Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"battery": ""}. It's not possible to write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.
Action (enum)
Triggered action (e.g. a button click). Value can be found in the published state on the action property. It's not possible to read (/get) or write (/set) this value. The possible values are: on, off, brightness_move_up, brightness_move_down, brightness_stop, arrow_left_click, arrow_right_click, arrow_left_hold, arrow_right_hold, arrow_left_release, arrow_right_release.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.