IKEA E1841

Model	E1841
Vendor	IKEA
Description	KNYCKLAN open/close remote water valve
Exposes	battery, action, linkquality
Picture

Notes

Pairing

Pair the switch to Zigbee2MQTT by pressing the pair button (found under the back cover next to the battery) 5 times in a row. The red light on the front side should flash a few times and then turn off (it's more visible to see the light from the back). After a few seconds it turns back on and pulsate. When connected, the light turns off.

OTA updates

This device supports OTA updates.

Exposes

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. To read (/get) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get with payload {"battery": ""}. It's not possible to write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Action (enum)

Triggered action (e.g. a button click). Value can be found in the published state on the action property. It's not possible to read (/get) or write (/set) this value. The possible values are: on, off.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.