ShinaSystem CSM-300ZB_V2
Model | CSM-300ZB_V2 |
Vendor | ShinaSystem |
Description | SiHAS multipurpose ToF sensor |
Exposes | battery, voltage, status, people, rf_pairing_on, counting_freeze, tof_init, led_state, rf_state, transaction, fast_in, fast_out, linkquality |
Picture | ![]() |
OTA updates
This device supports OTA updates.
Exposes
Battery (numeric)
Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 100
. The unit of this value is %
.
Voltage (numeric)
Voltage of the battery in millivolts. Value can be found in the published state on the voltage
property. It's not possible to read (/get
) or write (/set
) this value. The unit of this value is mV
.
Status (enum)
Currently status. Value can be found in the published state on the status
property. It's not possible to read (/get
) or write (/set
) this value. The possible values are: idle
, in
, out
.
People (numeric)
People count. Value can be found in the published state on the people
property. To read (/get
) the value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/get
with payload {"people": ""}
. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"people": NEW_VALUE}
. The minimal value is 0
and the maximum value is 100
.
Rf_pairing_on (enum)
Run RF pairing mode. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"rf_pairing_on": NEW_VALUE}
. The possible values are: run
.
Counting_freeze (binary)
Counting Freeze ON/OFF, not reporting people value when is ON. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"counting_freeze": NEW_VALUE}
. If value equals ON
counting_freeze is ON, if OFF
OFF.
Tof_init (enum)
ToF sensor initial. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"tof_init": NEW_VALUE}
. The possible values are: initial
.
Led_state (binary)
Indicate LED enable/disable, default : enable. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"led_state": NEW_VALUE}
. If value equals enable
led_state is ON, if disable
OFF.
Rf_state (binary)
RF function enable/disable, default : disable. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"rf_state": NEW_VALUE}
. If value equals enable
rf_state is ON, if disable
OFF.
Transaction (enum)
Transaction interval, default : 400ms. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"transaction": NEW_VALUE}
. The possible values are: 0ms
, 200ms
, 400ms
, 600ms
, 800ms
, 1,000ms
.
Fast_in (binary)
Fast process enable/disable when people 0 to 1. default : enable. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"fast_in": NEW_VALUE}
. If value equals enable
fast_in is ON, if disable
OFF.
Fast_out (binary)
Fast process enable/disable when people 1 to 0. default : enable. Value will not be published in the state. It's not possible to read (/get
) this value. To write (/set
) a value publish a message to topic zigbee2mqtt/FRIENDLY_NAME/set
with payload {"fast_out": NEW_VALUE}
. If value equals enable
fast_out is ON, if disable
OFF.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.