Develco AQSZB-110

Model	AQSZB-110
Vendor	Develco
Description	Air quality sensor
Exposes	voc, temperature, humidity, battery, battery_low, air_quality, linkquality
Picture

OTA updates

This device supports OTA updates.

Options

• voc_precision: Number of digits after decimal point for voc, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

• voc_calibration: Calibrates the voc value (absolute offset), takes into effect on next report of device. The value must be a number.

• temperature_precision: Number of digits after decimal point for temperature, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

• temperature_calibration: Calibrates the temperature value (absolute offset), takes into effect on next report of device. The value must be a number.

• humidity_precision: Number of digits after decimal point for humidity, takes into effect on next report of device. The value must be a number with a minimum value of 0 and with a with a maximum value of 3

• humidity_calibration: Calibrates the humidity value (absolute offset), takes into effect on next report of device. The value must be a number.

Exposes

Voc (numeric)

Measured VOC value. Value can be found in the published state on the voc property. It's not possible to read (/get) or write (/set) this value. The unit of this value is µg/m³.

Temperature (numeric)

Measured temperature value. Value can be found in the published state on the temperature property. It's not possible to read (/get) or write (/set) this value. The unit of this value is °C.

Humidity (numeric)

Measured relative humidity. Value can be found in the published state on the humidity property. It's not possible to read (/get) or write (/set) this value. The unit of this value is %.

Battery (numeric)

Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 100. The unit of this value is %.

Battery_low (binary)

Indicates if the battery of this device is almost empty. Value can be found in the published state on the battery_low property. It's not possible to read (/get) or write (/set) this value. If value equals true battery_low is ON, if false OFF.

Air_quality (enum)

Measured air quality. Value can be found in the published state on the air_quality property. It's not possible to read (/get) or write (/set) this value. The possible values are: excellent, good, moderate, poor, unhealthy, out_of_range, unknown.

Linkquality (numeric)

Link quality (signal strength). Value can be found in the published state on the linkquality property. It's not possible to read (/get) or write (/set) this value. The minimal value is 0 and the maximum value is 255. The unit of this value is lqi.