Philips 8719514440937/8719514440999
Model | 8719514440937/8719514440999 |
Vendor | Philips |
Description | Hue Tap dial switch |
Exposes | battery, action, linkquality |
Picture | ![]() |
Notes
Pairing
The device can be set to pairing mode by removing the device's back cover. There is a small "setup" button next to the battery which must be pressed for a few seconds by using a paperclip or something similiar, which will bring the device into pairing mode. If this is a brand new device, hold button 1 for 3 sec to pair.
OTA updates
This device supports OTA updates.
Options
simulated_brightness
: Simulate a brightness value. If this device provides a brightness_move_up or brightness_move_down action it is possible to specify the update interval and delta. The action_brightness_delta indicates the delta for each interval. Example:
simulated_brightness:
delta: 20 # delta per interval, default = 20
interval: 200 # interval in milliseconds, default = 200
Exposes
Battery (numeric)
Remaining battery in %, can take up to 24 hours before reported.. Value can be found in the published state on the battery
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 100
. The unit of this value is %
.
Action (enum)
Triggered action (e.g. a button click). Value can be found in the published state on the action
property. It's not possible to read (/get
) or write (/set
) this value. The possible values are: button_1_press
, button_1_press_release
, button_1_hold
, button_1_hold_release
, button_2_press
, button_2_press_release
, button_2_hold
, button_2_hold_release
, button_3_press
, button_3_press_release
, button_3_hold
, button_3_hold_release
, button_4_press
, button_4_press_release
, button_4_hold
, button_4_hold_release
, dial_rotate_left_step
, dial_rotate_left_slow
, dial_rotate_left_fast
, dial_rotate_right_step
, dial_rotate_right_slow
, dial_rotate_right_fast
.
Linkquality (numeric)
Link quality (signal strength). Value can be found in the published state on the linkquality
property. It's not possible to read (/get
) or write (/set
) this value. The minimal value is 0
and the maximum value is 255
. The unit of this value is lqi
.